Focke Wulf A8/R2 Reichsverteidigung - Markings 1/48 - 248059

248059

New product

246 Kč tax incl.

Add to wishlist

How does it work?




The preparation of the surface prior to the application of the HGW Wet Transfer:

  • The HGW Wet Transfer technology has been tested on Gunze brand paints and preparations.
  • Carry out the test (not on the model), if you are applying to paint made by a different manufacturer.
  • We recommend to spray the surface with a glossy varnish in order to achieve a perfect result.
  • No matter whether you are applying the transfer onto paint or varnish, it is advisable to go over the surface using sandpaper of a grade from 6 000 to 8 000.
  • Naturally, it is also essential to ensure that the base is clean, grease-free and clear of dust.

You will need:

  • a scalpel,
  • sharp tweezers,
  • the Mr. Mark Softer product by Gunze,
  • a cotton bud and clean cloth.

Step by Step:

1. Cut out the required design using a sharp scalpel.

wet-transfers

2. Soak the base paper in warm water (approx. 20 sec).

wet-transfers

3. Remove the transfer from the base paper.

wet-transfers

4. Apply a layer of Mr. Mark Softer on the surface where you intend to apply the transfer.

wet-transfers

5. Place the transfer in the required position on the layer of Mr. Mark Softer.

wet-transfers

6. Carefully press out any excess liquid and bubbles. (Use the cloth and the cotton bud.)

wet-transfers

7. Ideally, leave it to dry for 6-8 hours.

wet-transfers

8. Carefully remove the transparent transfer film.

wet-transfers

9. Clean off any traces of transfer glue with a wet cloth.

wet-transfers

No customer reviews for the moment.

Write a review

Focke Wulf A8/R2 Reichsverteidigung - Markings 1/48 - 248059

Focke Wulf A8/R2 Reichsverteidigung - Markings 1/48 - 248059

30 other products in the same category: